Boston Harbor Swing Arm Adjustable Desk Lamp, 60 W, A19

Boston Harbor Dimmable Porch Light, (1) 60/13 W, A19/Cfl Lamp

Boston Harbor Flexible Table Lamp, 60 W, A19

ProSource Dimmable Ceiling Light Fixture, (2) 60 W Standard/Cfl Lamp, Bronze

Standard duplex receptacles feature longer, wider straps providing 40% more contact area to the wallboard. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Terminal screws backed out - ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire.

Meets all UL 498 requirements. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. 1/2 in thick steel wraparound mounting strap galvanized for corrosion resistance. Easy access split circuit break-off tab (except dual voltage). Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out; ready for wiring. Combination slot/Phillips head mounting and terminal screws.

PowerZone Extension Cord, 8 Ft L, 3 Outlet, 16/3 Awg

Plug 2 pole / 2 wire - non-polarized - 15 amp - 125 volt -.328 inches cord diameter plug - black rubber General duty, meets all Underwriter Laboratories 498 requirements. Plug blades are firmly embedded in body. Terminals in individual chambers to positively insulate conductors. Nema 1-15.

Meets all UL 498 requirements. Solid brass straight plug blades. Combination slot/Phillips head mounting and terminal screws. Temperature rating of -20 to 60 deg C. 15 A, 125 V. 1/4 to 39/64 in cord diameter. UL listed, CSA Certified. NEMA 5-15P.

BUSS NO TIME CART FUSE 20A

Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits.

Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits.

Provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from overloads and single phasing on three phase systems. Will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds. 250 V maximum. UL listed, CSA Certified.

UL listed, (file no. E15055). Meets all UL 496 and 498 requirements. CSA certified, (file no. 1739 (6231-04). NOM certified. Temperature rating -40 to 65 deg C. 250 V, 660 W.

LMPHLDR 660W 250V BLKiece terminals and contacts. Wire range 18 to 12. Sockets are made of heat-resistant phenolic. Hook mounting. 660 watts. 250 volt. Meets all UL 496 requirements.